[Equest-users] Fwd: eQuest Enduse results table

[Nathan Miller]

You could pick an end use category that is currently unused, such as refrigeration or task lights, and assign the elevator loads to that end use. In detailed edit you can also create sub-meters to the main electrical meters to separate out the load, but that is more work.


Nathan Miller - PE, LEED(r)AP BD+C, CEM
Mechanical Engineer/Senior Energy Analyst
RUSHING | D 206-788-4577 | O 206-285-7100
www.rushingco.com<http://www.rushingco.com/>

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of yashika gulati
Sent: Thursday, April 03, 2014 2:13 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Fwd: eQuest Enduse results table

Hi

I am working upon one multi-family high rise building in Brooklyn. For that, I need to install elevators as per NYSERDA guidelines in eQuest model. I know I can give schedules in equipment loads separately for elevators but how can I get separate results for that in end use result table. Is there any way if I can customise result table (please find attached image) to see the separate row for elevators?
Thanks
Y



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140403/3e23d955/attachment-0002.htm>