[Equest-users] Concerning Heatwheel

[Omar ElRawy]

Dear all,            I'am modelling a FAHU system with heat recovery with 100% fresh air, no return. I need to know if there is a way to model the system's exhaust CFM on the system level in eQuest, or i must model the exhaust value by dividing it on the zones, then entering it at the "zones' level" in eQuest?  
Thanks,
Omar ElRawy, LEED AP BD+C
LEED Project Manager
EA Sustainable Building Consultants
http://www.ea-buildingconsultants.com/ 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20141214/9b7981fb/attachment.htm>