[Equest-users] Equest - Error during simulation
Mallory Schaus
mschaus at primeraeng.com
Wed Jul 23 07:44:52 PDT 2014
Molly/Ginnie,
I've been having similar issues with one model in particular, and cannot seem to find a cause at all.
Based on previous comments in the forum, it was suggested that the version of eQuest should be validated (3.65 vs. 3.64), but this is not a solution for a model that was built and re-opened on one machine (all using 3.65).
I've received the error Ginnie listed below, and upon re-building the entire model, it disappeared. However, after returning to the model the next day, another Fortran error appeared (see attached), and is affecting all versions of the model (back-ups, etc), once opened.
Has anyone found a concrete solution to this? It appears to be an issue with the new version of the software.
I've also tried running it locally on my computer, and on our network; both have the same error.
Thanks!
Mallory
Mallory Schaus
Energy Engineer
Primera Engineers, Ltd.
312/242.6407
From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Molly Curtz
Sent: Tuesday, June 17, 2014 10:43 AM
To: Ginnie Schofield; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Equest - Error during simulation
Hi Ginnie,
I just wanted to add that I've been getting similar same errors in eQuest 3.65. Haven't found any solution yet, but I'll post here if I do!
Molly Curtz PE BEMP LEED AP BD+C
Senior Mechanical Engineer
Arup
719 Second Avenue Suite 400 Seattle WA 98104
t +1 206 749 9674 d +1 206 493 2234
f +1 206 749 0665
www.arup.com<http://www.arup.com/>
From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Ginnie Schofield
Sent: Wednesday, May 28, 2014 12:32 PM
To: equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>
Subject: [Equest-users] Equest - Error during simulation
Equest-users:
Many thanks to Jeff for his response to my exhaust input question, figured it out.
Now I think there is a problem with the Equest program, 3.65 version.
See attached error messages, which boots me completely out of the program as it shuts down.
These errors did not appear when I did my model initially, everything ran correctly.
I made some exhaust air input modifications to the model, then tried to simulate it, and got the attached error.
So, as a trial, I ran my " copy" to see if it did the same thing. And it does.
I had attached the model file with .inp file with my original question posted a bit earlier this afternoon.
What could be the problem and is there a fixable solution? Hope I don't have to rebuild the model. :(
Thank you in advance for any and all responses.
GINNIE SCHOFIELD
ENGINEERING DESIGN ASSOCIATES
1607 CY Ave, Ste 303, Casper, WY 82604
(Ph) 307-266-5033 (Fx) 307-234-3805
____________________________________________________________
Electronic mail messages entering and leaving Arup business
systems are scanned for acceptability of content and viruses
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140723/360bc8a3/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Fortran Error.JPG
Type: image/jpeg
Size: 24423 bytes
Desc: Fortran Error.JPG
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140723/360bc8a3/attachment.jpeg>
More information about the Equest-users
mailing list