[Equest-users] how to model steam absorption chiller in eQUEST

[Aaron]

Hi guys
      I'm modelling a steam absorption chiller, but seems not easy. I've set the chiller as below.  I set heating source as Hot water loop, because seems steam is not available for absorption chiller.
     
  
 I set steam meter for steam source, 
 
  
 but error appears after running the model saying absorption chiller must have a pump for absorption steam loop as below.
 
 please, could anyone give some guide on this problem for me?
  
 thanks
  
                              Aaron
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140512/af8781f9/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 27650 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140512/af8781f9/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 14271 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140512/af8781f9/attachment-0001.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 106552 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140512/af8781f9/attachment-0002.jpeg>