[Equest-users] Trouble with CAD footprints

[Nick Caton]

The little "X" icon on the top right deletes the currently selected vertex.  You can click that 4 times to start from scratch ;).

[cid:489575314 at 22072009-0ABB]

NICK CATON, P.E.
SENIOR ENGINEER

Smith & Boucher Engineers
25501 west valley parkway, suite 200
olathe, ks 66061
direct 913.344.0036
fax 913.345.0617
www.smithboucher.com

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Sol Rosenbaum
Sent: Monday, May 12, 2014 7:58 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Trouble with CAD footprints

I have the CAD outline of my building (yellow outline below), but I am having trouble tracing it because there is a rectangular shape (the red and blue lines) that shows up and I don't know how to edit it.   I have used a footprint before, but I am still new to eQuest and can't figure out how to get rid of the rectangle so I can create my custom shaped footprint.
[cid:image003.jpg at 01CF6DC6.09CDD3F0]

Thanks,
Sol


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140512/67648fdd/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 1459 bytes
Desc: image002.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140512/67648fdd/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 39056 bytes
Desc: image003.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140512/67648fdd/attachment-0001.jpg>