[Equest-users] hourly reporting of outdoor dry bulb temps
Christian Stalberg
christian at naturalintelligence.us
Mon May 19 08:51:19 PDT 2014
Thanks Bill. I tried that and still no change.
Regards,
_
Christian Stalberg
Natural Intelligence, LLC
http://naturalintelligence.us
Tel. 415.531.4610
-----Original Message-----
From: Bishop, Bill [mailto:bbishop at pathfinder-ea.com]
Sent: Monday, May 19, 2014 11:39 AM
To: Christian Stalberg; equest-users at lists.onebuilding.org
Subject: RE: [Equest-users] hourly reporting of outdoor dry bulb temps
Christian,
If you are using eQUEST 3.65, try the newest release (7163) which fixes
issues with D2SimViewer.
Regards,
Bill
William Bishop, PE, BEMP, BEAP, CEM, LEED AP | Pathfinder Engineers &
Architects LLP Senior Energy Engineer
134 South Fitzhugh Street Rochester, NY 14608
T: (585) 698-1956 F: (585) 325-6005
bbishop at pathfinder-ea.com www.pathfinder-ea.com
-----Original Message-----
From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On
Behalf Of Christian Stalberg
Sent: Monday, May 19, 2014 11:15 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] hourly reporting of outdoor dry bulb temps
For some reason when I include outdoor dry bulb temps in hourly reporting I
get all zeros in the appropriate column. I select Variable Type GLOBAL,
then Outside dry-bulb temp (F). Temps are reported fine in the standard
detailed report viewed in the D2SimViewer so the weather file appears sound.
If anyone has seen this before and can tell me what I am doing wrong it
would be greatly appreciated. Thank you.
Regards,
_
Christian Stalberg
Natural Intelligence, LLC
http://naturalintelligence.us
Tel. 415.531.4610
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
More information about the Equest-users
mailing list