[Equest-users] Deleting a Chiller From a Chilled Water Loop

Sharad Kumar sharadcapricious at gmail.com
Thu Aug 13 02:10:14 PDT 2015


Hi Jill,

May be i can give a hint of.
I have observed that there are many repeated names, for example Mechanical
room, Mechanical Rm plnm Stairways and Stairways plnm.
You can remove the error by changing the names with some suffix which can
help you.
Kindly give some numbering for all those spaces.
Just give  a try, if any further issue, may be you can have the query.
This will be  much helpful. Deleting chillers may not bring these many
errors.


Thanks,
Sharad.

On Thu, Aug 13, 2015 at 1:32 AM, <equest-users-request at lists.onebuilding.org
> wrote:

> Send Equest-users mailing list submissions to
>         equest-users at lists.onebuilding.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>
> or, via email, send a message with subject or body 'help' to
>         equest-users-request at lists.onebuilding.org
>
> You can reach the person managing the list at
>         equest-users-owner at lists.onebuilding.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Equest-users digest..."
>
> Today's Topics:
>
>    1. Deleting a Chiller From a Chilled Water Loop (Jill Moreland)
>
>
> ---------- Forwarded message ----------
> From: Jill Moreland <jill.moreland at plugsmart.com>
> To: Equest Users Mailing List <Equest-users at lists.onebuilding.org>
> Cc:
> Date: Wed, 12 Aug 2015 15:52:45 -0400
> Subject: [Equest-users] Deleting a Chiller From a Chilled Water Loop
> Good Afternoon,
>
> I am trying to generate the savings of changing out the pumps in the
> cooling tower and chiller of the hospital I am modeling. I am out of the
> wizard and in detail mode and noticed that four chillers (1a, 1b, 2a, 2b)
> were showing up in the component tree instead of just the actual two. I had
> no errors in my file and right clicked on chiller 1b & 2b and hit delete.
> The warning did say there was a child component but I believe that was the
> pump associated with it and hit delete.
>
> Now when I try to run simulation I get "1 Run(s) Terminated Due to Errors"
> and can not view the summary report. When I left click the "Check Building
> Description" box it says there are no BDL errors. Not sure how to resolve.
> I have a saved file with the chillers before they were deleted but have
> attached the file with 1b and 2b deleted that I am having problems with and
> would greatly appreciate any help. Thanks!
>
>
> Jill Moreland
> Connect Program Manager
> Plug Smart
> Jill.Moreland at PlugSmart.com
> Cell: 239-233-0993
> Fax: 800-518-5576
>
>
> Plug Smart is accepting new clients, the best praise you could give us a
> recommendation to a potential new client. Everyone needs to save money,
> Plug Smart can make it happen.
>
> Confidential:
>
> This e-mail and any files transmitted with it are the property of Juice
> Technologies, LLC. and/or its affiliates, are confidential, and are
> intended solely for the use of the individual or entity to whom this e-mail
> is addressed. If you are not one of the named recipients or otherwise have
> reason to believe that you have received this e-mail in error, please
> notify the sender and delete this message immediately from your computer.
> Any other use, retention, dissemination, forwarding, printing or copying of
> this e-mail is strictly prohibited.
>
> _______________________________________________
> Equest-users mailing list
> Equest-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150813/4b0dfa40/attachment.htm>


More information about the Equest-users mailing list