[Equest-users] error msg: loop - no primary heating equipment attached

Pranita Kothuru Komirishetty pranita.kothuru at gmail.com
Thu Jul 16 06:27:22 PDT 2015


Good Morning -

I am working on a 65 story building in eQuest 3.64. The building is cooled
by Standard VAV units (primary cooling equipement is chillers) heated by
perimeter baseboards (steam boilers).

The first 6 floors of the building have perimeter induction units with no
re-heat. For this I have created a different loop (linked this to the
primary heating loop). This loop is called the Circulation Loop 5 in my
model. I assign this loop to the   baseboard loop in the air side HVAC
parameters.

When I run the simulation I get the following error:

 ***ERROR***********************************************************************
             Loop: Circulation Loop 5               has no attached primary
             heating equipment.

I could not find anything in the archives directly to tackle this issue.
Not an expert in HVAC and hence need your advise.


snapshot of loop window:

[image: Inline image 1]

Thanks in advance.
-- 

*- Pranita *
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150716/5ca23280/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 244489 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150716/5ca23280/attachment.png>


More information about the Equest-users mailing list