[Equest-users] 回复： External Glazing does not display in eQuest 3.64

[赵永青]

This problem always occurs when some windows exceeds the wall.Check your window width and height of your window and ensure that window Height + window sill < Wall hieght and Window X+Window width < wall width.
  
 Yongqing Zhao
 
------------------
赵永青
 长沙绿建节能科技有限公司
长沙市韶山中路438号 
电话:13574805636
 Email:zhaoyongqing1987 at 126.com
          503271081 at qq.com 


 




------------------ 原始邮件 ------------------
发件人: "GK Pandian"<kgkpandian at gmail.com>; 
发送时间: 2015年6月11日(星期四) 中午1:58
收件人: "shilpa surana"<surana.shilpa at gmail.com>; 
抄送: "equest-users at lists.onebuilding"<equest-users at lists.onebuilding.org>; 
主题: Re: [Equest-users] External Glazing does not display in eQuest 3.64



  Generally this issue will occur if you change the foot print area or floor/ceiling heights and other parameter related to windows. Please ensure that you are not changing any values once you customize the windows. 


Thanks

Gopi
   
 On Thu, Jun 11, 2015 at 3:51 AM, shilpa surana <surana.shilpa at gmail.com> wrote:
   Fellow eQuest users,
 

 I am drawing external glazing in the wizard mode, however, when I exit out of the wizard mode, the glazing does not show up. I can see the glazing in the plan view, however, I cant get them to display in 3D View. I am using eQuest 3.64. Has anyone faced similar issues?
 

 Best,
 

 Shilpa Surana 

  




_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150611/1ee99ced/attachment.htm>