[Equest-users] SD Bldg Shell -Change in bldg shell order

Sharad Kumar sharadcapricious at gmail.com
Wed Jun 24 02:43:12 PDT 2015


Hi Pranita,

The thing that you can do is to change the Z coordinate in detailed mode to
be one above another. For this you will have to go in detailed mode then
use the building shell to get the floor properties window.
You can see that the Z coordinate in the below example is 24 ft.
Similarly, one can input the respected floors Z coordinate as per the
elevation of the building.
For example in your case if the E5 is having floor height 48 ft, then you
can input the respected 48 ft in Z coordinate and remaining 12, 24 ,36 in
E2 , E3, E4 respectively. This is as per assumption that for each floor
height the floor to floor height is 12 ft.
Similarly you will have to input various z coordinates for each floor to be
in order.
Find the window to be edited below as an example.

[image: Inline image 2]

You will have to do it for each floor. You will have to manipulate the
things as per your case.

Thanks,
Sharad
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150624/26ea7cbc/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 128314 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150624/26ea7cbc/attachment.png>


More information about the Equest-users mailing list