[TRNSYS-users] type 919 data files creation

[David BRADLEY]

Malak,
   The contents of the files are described in the Type919 entry of the 
TESS HVAC manual documentation ..\Tess 
Modes\Documentation\06-HVACLibraryMathematicalReference.pdf. It does not 
say so explicitly in the documentation, but the files are created based 
on performance data files that are provided by manufacturers. The 
catalog performance data can usually be downloaded from manufacturer's 
websites. If you need a generic machine, you can use the sample data 
files as they are representative of a basic single-stage device.
Kind regards,
  David


On 4/7/2013 21:53, Dakhli Melek wrote:
> Hello,
> I am modeling a heat pump powered by solar collector hot water in the 
> source side for space heating. I see that there are 4 external files 
> to provide but there's no explanation how to generate them.
> Any clarification would be appreciated...any advice for data sheet 
> also? (the system is for Montreal region)
>
> Thank you in advance
>
> -- 
> /Cordialement,/
> /Malak DAKHLI/
> /Diplome : Ingénieure en génie énergétique/
> /E-mail : dakhli.malak at gmail.com <mailto:dakhli.malak at gmail.com>/
> /Tel : 514 559 3889 <tel:514%20559%203889>/
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130409/7e464cc5/attachment-0001.htm>