[TRNSYS-users] Simulation stops with a run time error M6201 when run with large time step

[David BRADLEY]

Joynal,
   A MATH error is a generic Fortran message that is generated when an 
illegal operation (such as trying to take the LOG of a negative number) 
occurs in a piece of source code. Such errors should be trapped by the 
source code (for example by checking the sign of the argument before 
trying to take the log of that argument and generating a clean error 
message then cleanly exiting the subroutine) but such checks are not 
always made. The only way to find out why the MATH error is being 
generated is to run the simulation from the Fortran compiler/debugger. 
You can send the project and all files needed to run it to your 
distributor for some help with debugging it.
Kind regards,
  David


On 4/14/2014 09:05, Joynal Abedin wrote:
>
> Dear TRNSYS users,
>
> My model stops with MATH error half way through when I run it with a 
> time step greater than 2 minutes but runs fine with 2min or less. I 
> have tried varying the time base in TYPE56. I am simulation an 
> multi-zone building with TYPE56 and HVAC systems using TYPE1231, 
> TYPE114 pump, TYPE650 heat exchanger, TYPE24 integrators etc. etc.
>
> What could I be doing wrong.
>
> Thanks for your help.
>
> Kind regards,
>
> Joynal Abedin.
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140414/90c4eb05/attachment-0001.htm>