[TRNSYS-users] Wrong balances using Heatpump(Type401), Storage (Type4a), Radiator (Type361)
lukas.spitalny at tu-dortmund.de
lukas.spitalny at tu-dortmund.de
Tue Apr 15 01:44:41 PDT 2014
Dear TRNSYS-Users,
I’m using a Heatpump model (Type401) with a storage (Type4a) for a heating simulation with a building (Type56). First, I just used a floor heating with an active layer to connect the heat output of the storage to Type56. Right now I’ve changed this and I implemented a Radiator (Type361). Now I have the problem that the energy balances disagree. While the energy output of the heat pump is app. 15000 kWh the energy to the building is app 11000 kWh. I’m also confused about the output values of the storage, where “Energy to load” is 11000 kWh and “Energy from source” is 15000 kWh, but the “heat losses” and the “internal energy change” of the storage are less then 500 kWh.
Thank you in advance!
Lukas Spitalny
--
Research Associate
TU Dortmund University
Institute of Energy Systems, Energy Efficiency and Energy Economics
Emil-Figge-Str. 68
44227 Dortmund
Phone: +49 (0)231 / 755-4305
Fax: +49 (0)231 / 755-4338
Mail: lukas.spitalny at tu-dortmund.de<mailto:lukas.spitalny at tu-dortmund.de>
www.ie3.tu-dortmund.de<http://www.ie3.tu-dortmund.de/>
Wichtiger Hinweis: Die Information in dieser E-Mail ist vertraulich. Sie ist ausschließlich für den Adressaten bestimmt. Sollten Sie nicht der für diese E-Mail bestimmte Adressat sein, unterrichten Sie bitte den Absender und vernichten Sie diese Mail. Vielen Dank.
Unbeschadet der Korrespondenz per E-Mail, sind unsere Erklärungen ausschließlich final rechtsverbindlich, wenn sie in herkömmlicher Schriftform (mit eigenhändiger Unterschrift) oder durch Übermittlung eines solchen Schriftstücks per Telefax erfolgen.
Important note: The information included in this e-mail is confidential. It is solely intended for the recipient. If you are not the intended recipient of this e-mail please contact the sender and delete this message. Thank you. Without prejudice of e-mail correspondence, our statements are only legally binding when they are made in the conventional written form (with personal signature) or when such documents are sent by fax.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140415/f6e57aaf/attachment-0001.htm>
More information about the TRNSYS-users
mailing list