[TRNSYS-users] Fwd: Thermostat is not working properly

David BRADLEY d.bradley at tess-inc.com
Mon Jan 27 10:45:56 PST 2014


Abhay,
   I would recommend that you send your simulation project file (*.tpf) 
and building file (*.b17) as well as any other files necessary to run 
your simulation to your distributor. It is not really possible to 
diagnose the results without the input files. It is possible that the 
simulation is working correctly but that the equipment that is being 
commanded by the thermostat does not have enough heating or cooling 
capacity available to maintain the space temperature.
Kind regards,
  David


On 1/26/2014 22:47, Abhay Pratap Singh wrote:
> Hi Trnsys users,
> I had attached a Simple thermostat to a building and my puprpose is to
> controls the signal of fan coil unit. I am taking 23.5 deg C as a
> setpoint and deadband of 1 deg C. In the start of the simulation it
> works properly but in between of simulation it is not working.
> I am attaching an excel file of results which shows room air
> temperature and fan coil unit signal. So, please help me out.
>
> Thanks for any help in this regard.
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140127/f06faa25/attachment-0001.htm>


More information about the TRNSYS-users mailing list