[TRNSYS-users] Help in type 9 (data reader)

Shahen Fakhraldin shahinrkl_7 at yahoo.com
Fri Sep 19 02:55:19 PDT 2014



 Dear TRNSYS users,

I have a txt file that represents cooling load of a building from 0 to 8760 hr (in hr timestep) and it consists of two columns (time,hr & load,kW)
And I'd like to use type 9e to read it in a project that will run only in the summer in 1 min time step.

Therefore, to understand the reading and the interpolating process of type 9e:

I connected type 9e to printer 25c (output 2 of type 9e to printer 25c) and I let the simulation run from 3624 to 3648 (for example) in a 1 hour timestep. 
The parameter of type 9e are:
Mode                                           5
Headers to skip                             1
No. of values to read                     2 
Time interval of data                      1 hr
Interpolate or not-1                       1 (interpolate)
Multiplication of factor-1                1
Addition factor-1                           0
Average or instantaneous value-1   1 (instantaneous)
Interpolate or not-2                       1 (interpolate)
Multiplication of factor-2                1
Addition factor-2                           0
Average or instantaneous value-2   1 (instantaneous)

However, when I compared the resulted text file with the original (input) load file I found a small difference between them (just the start point was the same value)
        hr     original    type9e
3624 4.08075 4.08075 
3625 3.29606 3.68841 
3626 2.67251 2.98429 
3627 2.11276 2.39263 
3628 1.56749 1.84012 
3629 1.00987 1.28868 
3630 1.97730 1.49358 
3631 3.61448 2.79589 
3632 6.02759 4.82103 
3633 7.45960 6.74359 
3634 8.49693 7.97826 
3635 9.06962 8.78327 
3636 9.21186 9.14074 
3637 9.58118 9.39652 
3638  10.29610 9.93864 
3639 10.89955  10.59782 
3640 11.23216 11.06585 
3641 11.21300 11.22258 
3642 10.30281 10.75791 
3643 8.84916 9.57598 
3644 7.35176 8.10046 
3645 6.42763 6.88970 
3646 5.68270 6.05516 
3647 4.99971 5.34120 
3648 4.34179 4.67075 


I changed the mode to 4 but I did not get the same input values as well.
Am I selected the wrong type of 9 or there is something incorrect in the parameters

Please can anyone help me 

Kind regards,
Shahen  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140919/14c1b75b/attachment-0001.htm>


More information about the TRNSYS-users mailing list