[TRNSYS-users] FW: FW: FW: want to design an array of hybrid pv panels or combination of hybrid pv panels and transparant pv panels

[Benjamin Stobbe]

Dear people,

 

I look into the Type 534 storage tank and yes I can choice more inlets so I
connected four solar panels to the water tank via pumps but I can not get it
working I get an error that a parameter is not behaving how it should but it
is referring to a parameter which does not exist or is an output parameter.
So I don't understand. It is a very basic model right now. I have no heat
exchangers now. The flow and the temp of all the port are now only
connected.

 

Best regards,

 

Benjamin Stobbe

 

 



 

Van: David BRADLEY [mailto:d.bradley at tess-inc.com] 
Verzonden: donderdag 23 juli 2015 22:56
Aan: TRNSYS users mailing list at OneBuilding.org
<trnsys-users at lists.onebuilding.org
<mailto:trnsys-users at lists.onebuilding.org> >; benjamin_stobbe at hotmail.com
<mailto:benjamin_stobbe at hotmail.com> 
Onderwerp: Re: [TRNSYS-users] FW: FW: want to design an array of hybrid pv
panels or combination of hybrid pv panels and transparant pv panels

 

Benjamin,
  If you have access to the TESS Storage Library then you can use Type534,
which can have quite a few inlets and outlets. If you are using only the
standard component library then you will need to use some instances of
Type11 to mix all the returns from your solar collectors before they go into
the tank. You will also need to then use some instances of Type11 at the
outlet of the tank to split the mixed flow so that it goes back to the
appropriate collector.
kind regards,
 David

On 07/23/2015 00:30, benjamin stobbe wrote:

Sorry to be more clear i am talking about a Stratified Storage Tank, because
i saw by some other tanks there is the option for 2 inlets i want 4 inlets
if possible from every facade, if you use water from other solar panels the
water is warmer and less heat exchange and less cooling for the solar panels
so this option is not feasable. 

 

Best regards,

 

Benjamin

  _____  

From:  <mailto:benjamin_stobbe at hotmail.com> benjamin_stobbe at hotmail.com
To:  <mailto:trnsys-users at lists.onebuilding.org>
trnsys-users at lists.onebuilding.org
Date: Thu, 23 Jul 2015 06:57:02 +0200
Subject: [TRNSYS-users] FW: want to design an array of hybrid pv panels or
combination of hybrid pv panels and transparant pv panels

Dear everyone, 

 

I had a followup on this question. I have that building and a building has
four different facades with four different direction but if i want to model
this with one tank is this possible. So a tank with more inputs or must i
then connect the solar panels with eachother and then to the tank.

 

Best regards,

 

Benjamin Stobbe

  _____  

From:  <mailto:benjamin_stobbe at hotmail.com> benjamin_stobbe at hotmail.com
To:  <mailto:trnsys-users at lists.onebuilding.org>
trnsys-users at lists.onebuilding.org
Date: Wed, 22 Jul 2015 10:37:28 +0800
Subject: [TRNSYS-users] want to design an array of hybrid pv panels or
combination of hybrid pv panels and transparant pv panels

Dear people,

 

I am busy with designing a solar system on a facade of a building and i want
this to be a combination of transparent solar cells and hybrid pv panels.
Now the last weeks I already figured the hybrid pv(PV-t) panels and I
thought about how can I do an array. There is a possible to do an array of
pv-panels but this is not hybrid and I thought I can make the surface of the
hybrid pv panel bigger but this also is not what you want because then you
also have to increase the amount of pipes and this does not seem to work
that good. For the problem transparent pv panels I can just use array of
solar panels and make the yield times the factor of transparent or make the
panels smaller.

 

But I hope someone can help me with the hybrid pv-t panels.

 

Best regards,

 

Benjamin Stobbe


_______________________________________________ TRNSYS-users mailing list
<mailto:TRNSYS-users at lists.onebuilding.org>
TRNSYS-users at lists.onebuilding.org
<http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org>
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org


_______________________________________________ TRNSYS-users mailing list
<mailto:TRNSYS-users at lists.onebuilding.org>
TRNSYS-users at lists.onebuilding.org
<http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org>
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
_______________________________________________ TRNSYS-users mailing list
<mailto:TRNSYS-users at lists.onebuilding.org>
TRNSYS-users at lists.onebuilding.org
<http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org>
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org





_______________________________________________
TRNSYS-users mailing list
 <mailto:TRNSYS-users at lists.onebuilding.org>
TRNSYS-users at lists.onebuilding.org
 <http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org>
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

 

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA
 
P:+1.608.274.2577
F:+1.608.278.1475
 <mailto:d.bradley at tess-inc.com> d.bradley at tess-inc.com
 
 <http://www.tess-inc.com> http://www.tess-inc.com
 <http://www.trnsys.com> http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150810/214d4a10/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 294947 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150810/214d4a10/attachment-0001.png>