[Equest-users] Modeling VRV System

Michael Marvin Michael.Marvin at BuroHappold.com
Mon Mar 12 06:37:34 PDT 2012


Hi Everyone, 

 

I know that there's been some chatter about this in the past, but has
anyone determined a good way to simulate a VRV system accurately in
eQuest? I've seen posts where some people have recommended using PVVT or
the Water Heat Pump System, but I'm curious to hear if anyone has found
a workaround that they feel works better than the others. 

 

Thanks, 

Michael Marvin, LEED AP
Buro Happold
100 Broadway 
New York, NY 10005
USA

Tel: (+1) 212 334 2025
Email: michael.marvin at burohappold.com
<blocked::mailto:chris.donnell at burohappold.com> 
www.burohappold.com <blocked::http://www.burohappold.com/> 

This transmission is confidential and intended solely for the person or
organisation to whom it is correctly addressed. If you are not the
intended recipient of this transmission, you should not take any action
in reliance on it.Further, this transmission may contain confidential
design and other information owned by Buro Happold Ltd. You should not
copy, distribute, use, offer for sale or hire such information or in any
way infringe the design and intellectual property rights of Buro Happold
Ltd. It is intended that communication by email from Buro Happold Ltd or
its employees is limited to communications connected to the services
provided by Buro Happold Ltd. Buro Happold Ltd accepts no liability for
any communications not connected to the services it provides. Computer
viruses may be transmitted or downloaded onto your computer system via
email communication. It is the recipient's responsibility to take any
action necessary to prevent computer viruses being transmitted in this
way. Accordingly, Buro Happold Ltd dsclaims all responsibility which
arises directly or indirectly from such transmission of computer
viruses. Buro Happold Ltd. Registered in England: 2049511. Registered
Office: Camden Mill, Lower Bristol Road, Bath BA2 3DQ.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120312/ffe46bbf/attachment.htm>


More information about the Equest-users mailing list