[Equest-users] Query regarding PDEC ( Passive cooling ) simulation in eQuest

Design Builder USA jcrossett at designbuilderusa.com
Wed Mar 7 08:07:33 PST 2012


You may wish to explore the free trial of Design Builder, as it has CFD,
natural ventilation and evaporate cooling.
Tho I am not sure if it can be used for your passive cooling requirement or
not..

Best of luck

On Wed, Mar 7, 2012 at 6:53 AM, Dahlstrom, Aaron <ADahlstrom at in-posse.com>wrote:

> Mansi – ****
>
> ** **
>
> We have done some schematic modeling of wind towers with Fluent, a CFD
> package as noted.****
>
> Our climate didn’t justify evaporative pre-cooling.****
>
> ** **
>
> eQUEST has a natural ventilation module, which I have not fully dived
> into. ****
>
> ** **
>
> I believe it requires inputs that would likely be validated by a CFD model
> – for example, I don’t think eQUEST’s natural ventilation model allows for
> evaporative pre-cooling as a temperature driver for natural air exchange in
> a space.****
>
> As eQUEST models each zone as a fully mixed space, and has limited air
> transfer between zones, you may also have trouble getting the thermal
> stratification from eQUEST that would typically be needed to drive natural
> ventilation in a PDEC.****
>
> ** **
>
> *Aaron Dahlstrom , PE, LEED® AP*****
>
> *In P**o**sse* – A subsidiary of *AKF*| 1500 Walnut Street, Suite 1414,
> Philadelphia, PA 19102 ****
>
> d: 215-282-6753| m: 267-507-5470| In Posse: 215-282-6800| AKF:
> 215-735-7290****
>
> e: ADahlstrom at in-posse.com | in posse web: www.in-posse.com | akf web:
> www.akfgroup.com****
>
>  ****
>
>  ****
>
>  ****
>
> *From:* equest-users-bounces at lists.onebuilding.org [mailto:
> equest-users-bounces at lists.onebuilding.org] *On Behalf Of *Sami, Vikram
> *Sent:* Wednesday, March 07, 2012 8:53 AM
> *To:* Mansi Jayswal; equest-users at lists.onebuilding.org
> *Subject:* Re: [Equest-users] Query regarding PDEC ( Passive cooling )
> simulation in eQuest****
>
> ** **
>
> Mansi,****
>
> ** **
>
> I doubt you can do this credibly in eQUEST. You really need a CFD type
> package to be able to simulate this. . A word of caution – the effort to
> develop the simulation for this is a master’s thesis in itself. ****
>
> ** **
>
> ** **
>
> ** **
>
> * *
>
> *Vikram Sami*, LEED AP BD+C****
>
> Sustainable Design Analyst****
>
> 1315 Peachtree St. NE, Atlanta, GA 30309****
>
> t: 404-443-7462    f: 404.892.5823       e: vikram.sami at perkinswill.com
> www.perkinswill.com****
>
> *Perkins+Will.*  Ideas + buildings that honor the broader goals of society
> ****
>
> ** **
>
> ** **
>
> *From:* equest-users-bounces at lists.onebuilding.org
> [mailto:equest-users-bounces at lists.onebuilding.org] *On Behalf Of *Mansi
> Jayswal
> *Sent:* Tuesday, March 06, 2012 11:25 PM
> *To:* equest-users at lists.onebuilding.org
> *Subject:* [Equest-users] Query regarding PDEC ( Passive cooling )
> simulation in eQuest****
>
> ** **
>
> ** **
>
> Hello friends,****
>
> ** **
>
> My name is Mansi Jayswal. I am a final year student of Masters Programme
> at CEPT University, India. By profession I am an architect. Currently I am
> doing thesis on passive cooling technique (Passive down draught evaporative
> cooling system- PDEC ). And try to identified that how much cooling load of
> HVAC system can be replaced through this system.****
>
> ** **
>
> Now my query is that is it eQuest is capable to simulate such building
> with wind tower or PHDC (PDEC ) system? If anybody knows please kindly
> reply. I have very days left for final submission and I am stuck here.****
>
> ** **
>
> Thanks ****
>
> ** **
>
> -- ****
>
>
> Regards,****
>
> Mansi Jayswal,****
>
> B.Arch I IGBC AP I M.Tech in Climate Change & Sustainable Development ****
>
> Faculty of Sustainable Environment & Climate Change,****
>
> Centre for Environmental Planning & Technology (CEPT) University****
>
> ** **
>
> This e-mail may contain information that is confidential, privileged or
> otherwise protected from disclosure. If you are not an intended recipient
> of this e-mail, do not duplicate or redistribute it by any means. Please
> delete it and any attachments and notify the sender that you have received
> it in error. Unintended recipients are prohibited from taking action on the
> basis of information in this e-mail. E-mail messages may contain computer
> viruses or other defects, may not be accurately replicated on other
> systems, or may be intercepted, deleted or interfered without the knowledge
> of the sender or the intended recipient. If you are not comfortable with
> the risks associated with e-mail messages, you may decide not to use e-mail
> to communicate with In Posse.
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Jeremiah D. Crossett
Energy Modeling Consultant
503-688-8951
www.DesignBuilderUSA.com <http://www.DesignBuilder.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120307/fed127b5/attachment-0002.htm>


More information about the Equest-users mailing list