[bldg-sim] DOE2.1E - PVAVS main heating coil

[James Campbell]

In modeling a PVAVS system in DOE2.1E, I can't get the main heating coil to
be recognized. I have entered a "HEAT-SET-T" (greater than the
"MIN-SUPPLY-T") in "system control" and specified the heating coil capacity,
however, the only heating I'm getting is from the baseboards. I've worked
around this problem before by distributing my main coil capacity into the
preheat, reheat and/or baseboard. Any opinions on the best work-around for
this problem?

James Campbell CEM, BEP
Geo-Marine Inc.



======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM