[bldg-sim] Utility Rates and eQUEST

[Scott Runyon]

I am a new user of eQUEST and am trying to model a building for LEED
energy savings purposes. I am comparing my design building to the ASHRAE
90.1 Code requirements of the same building. 

 

When setting up my electricity rates I can use Block Charges and
Ratchets. If I was able to find an average rate per kWh, how much would
this impact my energy reports? I am concerned that trying to get too
complicated by using multiple types of rates could actually hurt my
model more than help it.

 

Any thoughts would be appreciated

Scott Runyon 
RMF Engineering, Inc.
Design Engineer

474 Wando Park Blvd, Suite 100 
Mt. Pleasant, SC 29464 
Phone: 843-971-9639 Ext. 108 
Fax: 843-971-9641 

 



===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20050930/e8810c3a/attachment.htm>