[bldg-sim] EQuest Question

Vikram Sami VSami at lasarchitect.com
Fri Aug 4 10:40:21 PDT 2006


The simplest way to do the courtyard thing (through the wizard) is to
model a small gap through one of the sides of the courtyard. What you'll
need to do then is to go in and delete the 2 exterior walls facing the
gap.
 
It is not possible to change interior wall types to exterior wall types
(that I know of), but you can create an exterior wall in the same
position, and delete the interior wall. 
 

Vikram Sami, LEED AP 
Direct Phone 404-253-1466 | Direct Fax 404-253-1366 

LORD, AECK & SARGENT ARCHITECTURE
Responsive Design * Technological Expertise * Exceptional Service 
www.lordaecksargent.com 

 

________________________________

From: bldg-sim at gard.com [mailto:bldg-sim at gard.com] On Behalf Of Matt
Barker
Sent: Friday, August 04, 2006 12:23 PM
To: bldg-sim at gard.com
Subject: [bldg-sim] EQuest Question



First Question:  How would you model a courtyard surrounded by
classrooms and be able to place windows on the courtyard walls?

 

Second Question:  Is it possible to change an interior wall type into an
exterior wall type?

 

Any help would be appreciated.  

 

Thanks,

Matt 


==================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM


===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20060804/d4671aa5/attachment-0002.htm>


More information about the Bldg-sim mailing list