[BLDG-SIM] Water-to-Air Heat Pumps in eQuest

[Paul Erickson]

Fellow Modelers...
 
I'm currently attempting to find some documentation on or means of
modeling Water-to-Air Heat Pumps in eQUEST.  Specifically, I am trying
to model ground source heat pumps.  I've looked at the following items,
but beyond these I can't seem to find what I seek:
 
1)  WSHP...If I select a water-source heat pump, the only two modes I
find are air- and water-cooled heat pumps that are generating hot and
cold water.  As for the water-to-water, I can connect it to a
ground-coupled loop, but I'd like a water-to-air.
 
2) Someone suggested using a water-cooled DX system, which can have the
condenser connected to the ground loop, but the heat pump option
available for heating is an air-to-air heat pump, not a water-to-air.
 
Any assistance would be greatly appreciated.  Thanks.
 
Paul


======================================================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20061107/0a830a0c/attachment.htm>