[BLDG-SIM] Gas Fireplace
David S Eldridge
DSE at grummanbutkus.com
Thu Jul 5 14:51:52 PDT 2007
You can schedule both the gas and electric loads as processes directly
on their respective meter in eQuest. The schedule to be used would be
determined by you ahead of time.
David
From: BLDG-SIM at gard.com [mailto:BLDG-SIM at gard.com] On Behalf Of Virdi
Permana
Sent: Thursday, July 05, 2007 4:24 PM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] Gas Fireplace
Hello Analyst/Engineers,
Need input on how to model fireplace and the dedicated exhaust fan.
It is 300,000Btu/h gas fire place that is used for esthetical only. All
heat is being exhausted through the chimney with 3200cfm VSD exhaust
fan.
1. Can somebody point me how to model this in eQuest?
2. Since it is not used for heating purposes, I assume it should be
modeled both for baseline and proposed model?
Any input is greatly appreciated.
Thanks
Virdiansyah "Virdi" Permana
EMSI
Energy Analyst
(202) 291 3102 T
(202) 291 3107 F
==================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070705/08797709/attachment-0008.htm>
More information about the Bldg-sim
mailing list