[BLDG-SIM] eQUEST daylight through interior windows

[Kingsley, Michael L.]

I am modeling a building with a 4-story internal atrium with skylights
on the roof.  There are some interior rooms with interior windows facing
the atrium, and I have enabled daylighting for these rooms.  When I run
the simulation I get errors for all of the rooms with only interior
windows saying that the window area must be greater than 0.1 ft2 for the
room.  The windows are much larger than that.  Has anyone else run into
this kind of problem?  Any thoughts?

 

Thanks in advance!

 

Michael L. Kingsley

E-mail <mailto:kezark at saic.com> :  kingsleym at saic.com
<mailto:kezark at saic.com> 

 



===========================
You received this e-mail because you are subscribed 
to the BLDG-SIM at GARD.COM mailing list.  To unsubscribe 
from this mailing list send a blank message to 
BLDG-SIM-UNSUBSCRIBE at GARD.COM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20070312/14cfa04b/attachment.htm>