[BLDG-SIM] DOE 2.1E Hourly Report Question
Jeff Haberl
jeffhaberl at tees.tamus.edu
Wed Nov 14 08:56:26 PST 2007
It is embedded in the output file ".out"....which you have to extract
with AWK...or something like that.
Jeff
8=! 8=) :=) 8=) ;=) 8=) 8=( 8=) 8=() 8=) 8=| 8=) :=') 8=)
8=) 8=?
Jeff S. Haberl, Ph.D.,P.E.............................jhaberl at tamu.edu
Professor......................................................Office
Ph: 979-845-6507
Department of Architecture.......................Lab Ph: 979-845-6065
Energy Systems Laboratory......................FAX: 979-862-2457
Texas A&M University..............................77843-3581
College Station, Texas, USA, 77843..........URL: www-esl.tamu.edu
8=/ 8=) :=) 8=) ;=) 8=) 8=() 8=) :=) 8=) 8=! 8=) 8=? 8=)
8=) 8=0
-----Original Message-----
From: BLDG-SIM at gard.com [mailto:BLDG-SIM at gard.com] On Behalf Of Brahme,
Rohini UTRC
Sent: Wednesday, November 14, 2007 9:45 AM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] DOE 2.1E Hourly Report Question
If you are using DOE2.1 e (not eQuest), the hourly report file gets
generated in the main doe2.1 folder - and it has a non-intuitive name
which I forget at this time and most probably the extension is .dat. The
reference manual explains this under the hourly reporting chapter.
-----Original Message-----
From: BLDG-SIM at gard.com [mailto:BLDG-SIM at gard.com] On Behalf Of Jon
Evans
Sent: Wednesday, November 14, 2007 10:15 AM
To: BLDG-SIM at gard.com
Subject: [BLDG-SIM] DOE 2.1E Hourly Report Question
I added the following code to a DOE 2.1E file to obtain the hourly
electric
(32) and gas consumption (45). The code was added in the systems block.
Where is the hourly report exported to? I was under the impression that
it
goes to the .sim file and would be called RB-1, but when I open that
file it
doesn't show up (the .sim file also gives me an out of memory message-
could
this be causing the problem?). Thanks for any insight in advance.
$=======================================$
$ Hourly Report Information
$=======================================$
S-1 = SCHEDULE
THRU DEC 31 (ALL) (1,24) VALUES = (1.) ..
RB-1 = REPORT-BLOCK
VARIABLE-TYPE = Alternate_1_RTU
VARIABLE-LIST = (32,45) ..
HR-1 = HOURLY-REPORT
REPORT-SCHEDULE = S-1
REPORT-BLOCK = (RB-1) ..
-Jon
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
==================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM at GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at GARD.COM
More information about the Bldg-sim
mailing list