[Bldg-sim] ASHRAE 90.1 2004 Appendix G, Baseline Simulation
Kairento, Janne
jkairento at cosentini-ma.com
Thu Dec 4 07:50:57 PST 2008
Hey All,
I am running a baseline simulation in eQUEST. I have created a
parametric run in which it will simulated the four different azimuth
angles as required by Appendix G. I was curious if the north SHGC can
rotate with the building. If not, I believe I would have to create four
separate files for the four orientation to keep the north SHGC in the
correct direction for the four separate models.
Thanks,
Janne
Janne Kairento, E.I.T., LEED AP
Cosentini Associates
One Broadway
Cambridge, MA 02142
Phone: 617.494.9090
Fax: 617.494.9292
Please consider the environment before printing this e-mail
NOTICE OF CONFIDENTIALITY
This E-mail message and its attachments (if any) are intended solely for the use of the addressees hereof. In addition, this message and the attachments (if any) may contain information that is confidential, privileged and exempt from disclosure under applicable law. If you are not the intended recipient of this message, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission. Delivery of this message to any person other than the intended recipient is not intended to waive any right or privilege. If you have received this message in error, please promptly notify the sender by reply E-mail and immediately delete this message from your system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20081204/f35a6da6/attachment.htm>
More information about the Bldg-sim
mailing list