[Bldg-sim] Automatic Generation of Baseline Models

Arpan Bakshi abakshi at yrgxyz.com
Thu Feb 7 19:21:54 PST 2013


Thank you for sharing, Dru. I am curious, what process AECOsim uses to
model G3.1.3.5 and G3.1.3.10 requirements for hot- and chilled-water pumps,
as they are not direct inputs,

...


On Thu, Feb 7, 2013 at 10:14 PM, <Dru.Crawley at bentley.com> wrote:

> I should add that users can chose to create the app g baseline models and
> modify them if necessary or chose to simply run them at simulation time.
>
> AECOsim Energy Simulator does check the HVAC systems and sizing before
> creating the models. The HVAC systems are automatically created based on
> preconfigured HVAC systems. (All done with EnergyPlus v7.2).
>
>
>
> -------- Original message --------
> From: Dru.Crawley at bentley.com
> Date:
> To: michael.rosenberg at pnnl.gov,bldg-sim at lists.onebuilding.org
> Subject: Re: [Bldg-sim] Automatic Generation of Baseline Models
>
>
> Bentley's AECOSIM Energy Simulator automatically creates baseline and
> budget buildings for Standard 90.1 2004, 2007, and 2010.
>
>
>
>
> -------- Original message --------
> From: "Rosenberg, Michael I" <michael.rosenberg at pnnl.gov>
> Date:
> To: bldg-sim at lists.onebuilding.org
> Subject: [Bldg-sim] Automatic Generation of Baseline Models
>
>
> I am hoping the building simulation community can help answer a question
> for me. What software packages out there automatically generate baseline
> models for the ASHRAE 90.1 Energy Cost Budget Methodology or Appendix G?
> Thanks.
>
> __________________________
>
> Michael Rosenberg, CEM, LEED AP
> Senior Research Scientist
> ENERGY & ENVIRONMENT DIRECTORATE
>
> Pacific Northwest National Laboratory
> 2032 Todd Street
> Eugene, OR 97405
> (541) 844-1960
> michael.rosenberg at pnnl.gov<mailto:michael.rosenberg at pnl.gov>
> www.pnnl.gov<http://www.pnl.gov/>
>
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20130207/4c348caf/attachment-0002.htm>


More information about the Bldg-sim mailing list