[Bldg-sim] LEED EAP2 simulation of a building without HVAC system

RobertWichert robert at wichert.org
Fri Jul 12 07:52:57 PDT 2013


Could this be done as a Core & Shell?  Without mechanical systems?


Robert Wichert P.Eng. LEED AP BD&C
+1 916 966 9060
FAX +1 916 966 9068







===============================================

On 7/12/2013 6:00 AM, Larry Degelman wrote:
> I'm not sure if this is helpful or not, but in Table G3.1 (Modeling 
> Requirements for Calculating Proposed and Baseline Performance), Parts 
> 10 (c) and (d) state the following:
> c.  Where no heating system exists or no heating system has been 
> specified, the heating system classification shall be assumed to be 
> electric, and the system characteristics shall be identical to the 
> system modeled in the baseline building design.
> d.  Where no cooling system exists or no cooling system has been 
> specified, the cooling system shall be identical to the system modeled 
> in the baseline building design.
> Regards,
> Larry
> ===============================
> Larry O. Degelman, P.E., BEMP, HBDP
> Professor Emeritus of Architecture
> Texas A&M University
> ===============================
> *From:* ?? <mailto:foolishstar at 163.com>
> *Sent:* Thursday, July 11, 2013 10:06 PM
> *To:* bldg <mailto:bldg-sim at lists.onebuilding.org>
> *Subject:* [Bldg-sim] LEED EAP2 simulation of a building without HVAC 
> system
> Dear all,
> In a LEED project, generally the design case needs to simulate the 
> energy consumption as the designed HVAC system. However, if HVAC 
> system does not be included in the design, how should I simulate to 
> obtain the EAP2 and EAC1?
> The HVAC system is left to the tenants to design and install.
> Thanks!
> Xing
>
>
> ------------------------------------------------------------------------
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to 
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20130712/52321b98/attachment-0002.htm>


More information about the Bldg-sim mailing list