[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Zone/Surface Geometry, Zone Multiplier

To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Zone/Surface Geometry, Zone Multiplier
From: Linda Lawrie <linda@xxxxxxxxxx>
Date: Tue, 16 Oct 2001 20:13:58 -0500
Delivered-to: lawrie.com%linda@xxxxxxxxxx
Delivered-to: mailing list EnergyPlus_Support@xxxxxxxxxxxxxxx
List-unsubscribe: <mailto:EnergyPlus_Support-unsubscribe@yahoogroups.com>
Mailing-list: list EnergyPlus_Support@xxxxxxxxxxxxxxx; contact EnergyPlus_Support-owner@xxxxxxxxxxxxxxx
Reply-to: EnergyPlus_Support@xxxxxxxxxxxxxxx

Zone multiplier not implemented. Have to repeat a zone 10 times if a building has 10 standard stories?

Zone multiplier will be implemented in the V1.0.1 release. It is a zone multiplier, not a floor multiplier.

Yahoo! Groups Sponsor

To unsubscribe from this group, send an email to: EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx The primary EnergyPlus web site is found at: http://www.eren.doe.gov/buildings/energy_tools/energyplus/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Prev by Date: [EnergyPlus_Support] Constructions, Layer Thickness/Total Thickness
Next by Date: [EnergyPlus_Support] Performance Curves, Where do curves come from?
Previous by thread: [EnergyPlus_Support] Constructions, Layer Thickness/Total Thickness
Next by thread: RE: [EnergyPlus_Support] Zone/Surface Geometry, Zone Multiplier
Index(es):
- Date
- Thread