[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Zone/Surface Geometry, Zone Multiplier

To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: RE: [EnergyPlus_Support] Zone/Surface Geometry, Zone Multiplier
From: habaza11@xxxxxx
Date: Wed, 17 Oct 2001 10:16:15 -0400
Delivered-to: lawrie.com%linda@xxxxxxxxxx
Delivered-to: mailing list EnergyPlus_Support@xxxxxxxxxxxxxxx
List-unsubscribe: <mailto:EnergyPlus_Support-unsubscribe@yahoogroups.com>
Mailing-list: list EnergyPlus_Support@xxxxxxxxxxxxxxx; contact EnergyPlus_Support-owner@xxxxxxxxxxxxxxx
Reply-to: EnergyPlus_Support@xxxxxxxxxxxxxxx

you can also copy and paste the zones in the text editor.
Linda Lawrie <linda@xxxxxxxxxx> wrote:

>Zone multiplier not implemented. Have to repeat a zone 10 times if a 
>building has 10 standard stories?
>
>Zone multiplier will be implemented in the V1.0.1 release.  It is a zone 
>multiplier, not a floor multiplier.
>

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.eren.doe.gov/buildings/energy_tools/energyplus/



 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Prev by Date: [EnergyPlus_Support] Simulation Parameters, Convergence tolerances
Next by Date: [EnergyPlus_Support] Fwd: can I use two heat exchanger with outside air system
Previous by thread: [EnergyPlus_Support] Zone/Surface Geometry, Zone Multiplier
Next by thread: [EnergyPlus_Support] Performance Curves, Where do curves come from?
Index(es):
- Date
- Thread