[EnergyPlus_Support] (unknown)

[habaza11@xxxxxx]

I run the example MTFT ermreheat in energy plus with a full year weather data, and I found the following;

The total (ZN001:WALL004:Inside Surface Mass Flux[kg/s/m2](Hourly)) = -5.28E-02

The total  (ZN002:WALL004:Inside Surface Mass Flux[kg/s/m2](Hourly)) = 1.92E-01

Since wall ZN001:WALL004 is the same wall ZN002:WALL004 ( two faces of the same partition) then the moisture which is stored in this wall will be 

-5.28E-02 + .92E-01 = 1.39E-01 kg/s/m2 = 501 kg/hour (1.39E-01 x 60 x 60).

This partition has two 3/4 “ gypsum board with moisture capacity of .13 m3/kg.

Could you please advice if the above math is correct?. 

 

Thank you.


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Free $5 Love Reading
Risk Free!
http://us.click.yahoo.com/TPvn8A/PfREAA/Ey.GAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/