Re: [EnergyPlus_Support] Mass Fluxes

["Michael J. Witte" <mjwitte@xxxxxxxx>]

The "total" fluxes of -5.28E-02 and 1.92E-01, did you sum over the 
year or take the average.  Since these are fluxes, they must be 
averaged.

On 9 Jul 2002, at 16:28, habaza11@xxxxxx wrote:

> I run the example MTFT ermreheat in energy plus with a full year weather data, and I found the following;
> 
> The total (ZN001:WALL004:Inside Surface Mass Flux[kg/s/m2](Hourly)) = -5.28E-02
> 
> The total  (ZN002:WALL004:Inside Surface Mass Flux[kg/s/m2](Hourly)) = 1.92E-01
> 
> Since wall ZN001:WALL004 is the same wall ZN002:WALL004 ( two faces of the same partition) then the moisture which is stored in this wall will be 
> 
> -5.28E-02 + .92E-01 = 1.39E-01 kg/s/m2 = 501 kg/hour (1.39E-01 x 60 x 60).
> 
> This partition has two 3/4 â?? gypsum board with moisture capacity of .13 m3/kg.
> 
> Could you please advice if the above math is correct?. 
> 
>  
> 
> Thank you.
> 
> 
> ------------------------ Yahoo! Groups Sponsor ---------------------~-->
> Free $5 Love Reading
> Risk Free!
> http://us.click.yahoo.com/TPvn8A/PfREAA/Ey.GAA/dkFolB/TM
> ---------------------------------------------------------------------~->
> 
> To unsubscribe from this group, send an email to:
> EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> 
> 
> 
>  
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
> 
> 



========================================================
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx