[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] Modelling natural cross-ventilation using COMIS module
Colin:
I'll try to look at this, hopefully tomorrow. I may have to enlist
the help of a COMIS expert, so this may delay an answer.
Mike
On 17 Jul 2002, at 10:46, colin harris wrote:
> Hi,
>
> I have attached a model of a simple cube, with a window in the south facade
> and a chimney exhaust zone at the north facade, the zones are connected via
> a door and the exhaust has a window at the top of it's north facade. I have
> run the simulation for a southerly wind over a day and calculated the
> Infiltration-Mass and Mixing-Mass for each zone. However, when i add up the
> mass flows (for an hour period - example 18:00 and 20:00) going into a zone
> (positive) and going out of a zone (negative), they don't add to zero as i
> expected they would. Is this assumption incorrect or am i modelling
> something wrong?
>
> Also, I was wondering if the Comis module for EnergyPlus is now maintained
> by EnergyPlus since the Comis 3.1 version has gone commercial. Or is the
> commercial version going to be plugged into EnergyPlus in the future?
>
> Kind regards
>
> Colin.
>
> ps: I have also looked at using ESP-r for modelling this natural
> ventilation, but have found it quite unaccessible (even if they have a
> GUI). In comparison I think the documentation and organisation of Energy
> Plus is excellent.
>
> To unsubscribe from this group, send an email to:
> EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
>
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
>
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
========================================================
EnergyPlus Testing and Support
EnergyPlus-Support@xxxxxxxx
------------------------ Yahoo! Groups Sponsor ---------------------~-->
Free $5 Love Reading
Risk Free!
http://us.click.yahoo.com/TPvn8A/PfREAA/Ey.GAA/dkFolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/