[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] opening on the horizontal suface

To: <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Subject: [EnergyPlus_Support] opening on the horizontal suface
From: "Xu-Lei" <600e5066@xxxxxxxxxxxxxxx>
Date: Sat, 20 Jul 2002 17:17:12 +0900
Delivered-to: lawrie.com%linda@xxxxxxxxxx
Delivered-to: mailing list EnergyPlus_Support@xxxxxxxxxxxxxxx
Importance: Normal
In-reply-to: <3D382849.25083.39110AAA@localhost>
List-unsubscribe: <mailto:EnergyPlus_Support-unsubscribe@yahoogroups.com>
Mailing-list: list EnergyPlus_Support@xxxxxxxxxxxxxxx; contact EnergyPlus_Support-owner@xxxxxxxxxxxxxxx
Reply-to: EnergyPlus_Support@xxxxxxxxxxxxxxx

Hi,

As the COMIS model can deal with the LVO, but if the opening is on the horizontal surface, which means this opening is not a window or a door, just like an air inet or outlet. How to do with this case?

Thanks in advance.

-------------------------------------

Lei Xu

Waseda University, Tokyo, Japan

Yahoo! Groups Sponsor

To unsubscribe from this group, send an email to: EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx The primary EnergyPlus web site is found at: http://www.energyplus.gov The group web site is: http://groups.yahoo.com/group/EnergyPlus_Support/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Follow-Ups:
- Re: [EnergyPlus_Support] opening on the horizontal suface
  - From: Michael J. Witte

References:
- Re: [EnergyPlus_Support] Modelling natural cross-ventilation using COMIS module
  - From: Michael J. Witte

Prev by Date: Re: [EnergyPlus_Support] Modelling natural cross-ventilation using COMIS module
Next by Date: [EnergyPlus_Support] Shading:Detached/ COMIS
Previous by thread: Re: [EnergyPlus_Support] Modelling natural cross-ventilation using COMIS module
Next by thread: Re: [EnergyPlus_Support] opening on the horizontal suface
Index(es):
- Date
- Thread