[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Any suggestions on how to model SolarWall

One possibility would be to model it as a supply plenum, where the 
plenum is a zone representing the solar wall.  See the 
SupplyPlenumVAV.idf example file.   

Mike Witte


On 30 Aug 2002, at 15:31, belleengr wrote:

> I am trying to model a new product, called SolarWall. It draws 
> ventilation air through a hollow wall system to use active solar 
> heating to pre-heat the air.
> 
> Does anyone have any suggestions on how this might be modelled?
> 
> Michelle Smith
> Belle Engineering, LLC
> 
> 
> 
> To unsubscribe from this group, send an email to:
> EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> 
> 
> 
>  
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 
> 
> 



========================================================
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Looking for a more powerful website? Try GeoCities for $8.95 per month.
Register your domain name (http://your-name.com). More storage! No ads!
http://geocities.yahoo.com/ps/info
http://us.click.yahoo.com/aHOo4D/KJoEAA/MVfIAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/