[EnergyPlus_Support] Questions on report variables

[Wong Sai Li <linda@xxxxxxxxxx> (by way of Linda Lawrie <linda@xxxxxxxxxx>)]

I wonder if you can tell me which report variables (e.g.
zone transmitted solar, opaque surface inside face conduction, .....etc.)
sum together to get the zone cooling/heating capacity indicated in the
zone sizing report or in year simulation output.
And there is glass solar, glass conduction, wall conduction, roof
conduction, underground conduction, internal conduction, people load,
lighting load, equipment load and infiltration load in the peak load
report of DOE2E. What are the report variables represent the above loads
in the EnergyPlus?

Thanks!

Lee

Yahoo! Groups Sponsor

ADVERTISEMENT

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/






Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.