[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Interface for input other sources data into EnergyPlus

Dear all,

My supervisor, Dr. Danny Li is EnergyPlus developer. I am helping him to 
carry out a research work about the daylight simulation for a existing 
building. We have collected the measured illuminance level for reference 
points for the project. But I don't want to use the DOE2 and EnergyPlus to 
calculate illuminance level on the reference points for my project. I want 
to use the calculated reference points' illuminance level from other 
daylight models or use the measured result from my site measurement, then 
input those data into EnergyPlus, which are only used to calculate the 
energy consumption (HVAC and Lighting electricity consumption) changes 
about this daylight application. I wonder if you could tell me how to do 
this and what the best way to achieve my goal are.
Thank you for your kind attention.

S L Wong 

------------------------ Yahoo! Groups Sponsor ---------------------~-->
Get 128 Bit SSL Encryption!

To unsubscribe from this group, send an email to:

The primary EnergyPlus web site is found at:

The group web site is:


Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/