[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] EnergyPlus Windows

To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] EnergyPlus Windows
From: Linda Lawrie <linda@xxxxxxxxxx>
Date: Fri, 18 Oct 2002 11:15:08 -0500
Delivered-to: lawrie.com%linda@xxxxxxxxxx
Delivered-to: mailing list EnergyPlus_Support@xxxxxxxxxxxxxxx
In-reply-to: <PJELJIBKEDMKMNIKNGMJAECOCFAA.andy@energycoding.com>
List-unsubscribe: <mailto:EnergyPlus_Support-unsubscribe@yahoogroups.com>
Mailing-list: list EnergyPlus_Support@xxxxxxxxxxxxxxx; contact EnergyPlus_Support-owner@xxxxxxxxxxxxxxx
References: <aomi6e+5ov6@eGroups.com>
Reply-to: EnergyPlus_Support@xxxxxxxxxxxxxxx

At 11:08 AM 10/18/2002, Andy Tindale wrote:

Is it possible to have a window a right up against the edge of a surface,
and in the extreme case completely fill a surface?

No and Yes.

A window must be on a wall. But it can virtually fill the space. (Not completely, I believe, but would have to try a simulation to actually see that).

The wall can be very, very small.

.001 perimeter, for example.

Linda

EnergyPlus WebSite: http://www.energyplus.gov
Owner: EnergyPlus_Support list
Member: EnergyPlus Development Team

Yahoo! Groups Sponsor

To unsubscribe from this group, send an email to: EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx The primary EnergyPlus web site is found at: http://www.energyplus.gov The group web site is: http://groups.yahoo.com/group/EnergyPlus_Support/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

References:
- [EnergyPlus_Support] Building Area & Vine on the wall/roof
  - From: rmp4aup6
- [EnergyPlus_Support] EnergyPlus Windows
  - From: Andy Tindale

Prev by Date: [EnergyPlus_Support] EnergyPlus Windows
Next by Date: Re: [EnergyPlus_Support] Building Area & Vine on the wall/roof
Previous by thread: [EnergyPlus_Support] EnergyPlus Windows
Next by thread: Re: [EnergyPlus_Support] Building Area & Vine on the wall/roof
Index(es):
- Date
- Thread