Re: [EnergyPlus_Support] Mean temperature too high?

[HSIEH Chun-Ming <chunming@xxxxxxxxxxxxxxxxxxx>]

In this case, we have windows but no infiltration and no people and equipment
inside the room.
Thank you very much.


Michael J. Witte wrote:
>  Are there windows letting solar in?  Is there infiltration to let 
>  heat escape?  Are there internal gains from people or equipment?  
>   
>  Mike
>   
>   
>  On 8 Nov 2002, at 6:55, rmp4aup6 wrote:
>   
>  > Dear all:
>  > 
>  > I am simuating a room without air conditioners!(design day)
>  > The max temperature outside is 36C and the daily temp range is 11C.
>  > but the mean temp inside the room increase rapidly from 24C to 36C
> in
>  > two hours (6 to 8 in the morning) and the highest temperature is about
>  > 51C at 3 in the afternoon. I know it is theoretically possible to get
>  > the result, but are there any parameters or objects in E+ I could use
>  > or how should I imporve the simulation result so that it will be close
>  > to the reality. (without open windows) Thank you very much.
>  > 
>  > 
>  > chunming
>  > 
>  > 
>   
>   
>  ========================================================
>  EnergyPlus Testing and Support      
>  EnergyPlus-Support@xxxxxxxx
>   
>   
>
>    To unsubscribe from this group, send an email to:
>  EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
>   
>  The primary EnergyPlus web site is found at:
>   http://www.energyplus.gov
>   
>   
>  The group web site is:
>   http://groups.yahoo.com/group/EnergyPlus_Support/
>   
>   
>   
>   
>   
>   
>   
>   Your use of Yahoo! Groups is subject to the 
> Yahoo! Terms of Service
> .
>