[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Building of eight plans

When using the multiplier, Energy+ is only multiplying the load for the described space?  Since it is not stacking geometry,  I would need to describe more of a building to get proper results for a situation such as a tall building that is partially shaded by adjacent shorter buildings.  I could multiply any spaces above the highest shade line, but I would need full orientation data to get proper shade results for lower floors wouldn't I? 

Ned Lyon

Senior Staff Engineer
Simpson Gumpertz & Heger Inc.

41 Seyon Street
Building #1, Suite 500
Waltham, MA  02453

Phone:  781-907-9000
Fax:  781-907-9009

>>> mjwitte@xxxxxxxx 01/15/03 12:34PM >>>

------------------------ Yahoo! Groups Sponsor ---------------------~-->
Turn flat surfaces into speakers with the Soundbug.

To unsubscribe from this group, send an email to:

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.


Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/