Re: [EnergyPlus_Support] Re: Heat Pump

["Cristina Castaño/LABEIN" <ccastano@xxxxxxxxx>]

Thanks for your help Don,

We already knew that those are the names of three types of coils and that
these are explained in the input - output document and in the Engineering
Manual but we do not understand the explanation of each coil.

We think that the COIL:DX:CoolingBypassFactorEmpirical heats the air and
COIL:DX:HEATINGEMPIRICAL cools it. And if  COIL:GAS:HEATING      operates
when the DX heating coil ( "HeatPump DX Heating Coil 1") is unable to
provide enough heat by itself to maintain the thermostat heating setpoint
temperature in the control zone, why isn´t there other coil to maintain the
thermostat cooling setpoint temperature?.

Cristina.







------------------------ Yahoo! Groups Sponsor ---------------------~-->
Get 128 Bit SSL Encryption!
http://us.click.yahoo.com/xaxhjB/hdqFAA/xGHJAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/