[EnergyPlus_Support] heat recovery

["zhaicq98" <chaoqinz@xxxxxxxxxxxxxx>]

Hi,

I do not understand why I must have a outside air mixer in order to 
use the air to air heat exchanger:generic. In the system I want to 
simulate, there is a fan together with a heating coil and a cooling 
coil in each zone which heat or cool the circulation air. The 
ventilation air is provided by a seperate outdoor air system, in 
which I would like to have total heat recovery between outside air 
and relief air. There should not be air mixture between supply air 
and return air. I am not sure how I can implement this system in E+.

Thanks,
Chaoqin


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Get A Free Psychic Reading! Your Online Answer To Life's Important Questions.
http://us.click.yahoo.com/Lj3uPC/Me7FAA/CNxFAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/