[EnergyPlus_Support] PCMs

["Wilde, Pieter de" <P.deWilde@xxxxxxxxxxx>]

Hello all!

This might be quite a long shot, but I am wondering whether EnergyPlus offers any options to model a gypsum plasterboard impregnated with Phase Change Materials? I've seen a paper that shows that PCMs can be simulated in ESP-r through a special materials facility, but haven't figured out how to do this in E+. Any ideas on how to tackle this issue?

Many thanks in advance,

Pieter

ir P.J.C.J. de Wilde
TNO Building and Construction Research
PO Box 49, 2600AA Delft, the Netherlands
phone: ++31-15-2763520
fax: ++31-2763022






------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for Your HP, Epson, Canon or Lexmark
Printer at Myinks.com. Free s/h on orders $50 or more to the US & Canada. http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/l.m7sD/LIdGAA/qnsNAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/