[EnergyPlus_Support] heat gains through envelope in E+

[Helen Xing <hxing@xxxxxxx>]

Hello,

To itemize the hourly heat gains through a buliding's envelope -

Is there a zone output for "Zone Opaque Surface Inside Face Beam Solar 
Absorbed"?  This output is available for single surfaces from the E+ 
results, but the zone sum doesn't seem so.

For window heat transfer and opaque surface inside face conduction (maybe 
something else as well), E+ gives both heat gain and loss.  Is there a zone 
output for the net value to reduce the data volume?

One step further, wonder if there is a direct output that gives the total 
net heat gain for a zone through the envelope?

Is there a manual or something that explains the available output names in 
.RDD files?


Thanks a lot,
Helen Xing


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for Your HP, Epson, Canon or Lexmark
Printer at Myinks.com. Free s/h on orders $50 or more to the US & Canada. http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/l.m7sD/LIdGAA/qnsNAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/