Re: [EnergyPlus_Support] Ground Heat Transfer

["Michael J. Witte" <mjwitte@xxxxxxxx>]

I am waiting to hear a definite answer back from the person who is 
most familiar with the slab program.  My guess is that the extra 
input is being ignored.  You could test this by commenting out the 
surplus object.  You should get the same result.

Mike


On 26 Sep 2003, at 19:52, johnrham39042 wrote:

> In the input guide and idd, it says if EquivSizing=TRUE, include the
> EquifAutoGrid module but not the AutoSizing module.  I notice the
> example file has EquivSizing=TRUE and also the Autosizing module,  
> and the file seems to run OK this with both included.
> 


========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Upgrade to 128-Bit SSL Security!
http://us.click.yahoo.com/p7cEmB/s7qGAA/yigFAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/