[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] "Zone/Sys Sensible Heating Energy" and "Zone Multiplier"



I am running a model with Purchased Air and everything goes fine until I
modify a zone multiplier from one to three. Then the "Zone/sys Sensible
Heating Energy" variable   outputs 0 for every timestep (while the
"Purchased air heating energy" variable is reporting good values).

I have reproduced the same problem in the "purchased air.idf" example with
similar results (Resistive Zone multiplier set to 3).

Can anybody help me with this?

Thanks in advance,




___________________________________________________________________
Dr. Miguel Angel Pascual
MIYABI Espacios Urbanos Bioclimaticos      E-mail: mapascual@xxxxxxxxxxxx
Dtor. Ingenieria
Phone:  +34 948203644
C/ Leyre 11-Bis, 1ºC                                                 Fax:
+34 948207860
31002 Pamplona - Spain
___________________________________________________________________




[Non-text portions of this message have been removed]


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/