[EnergyPlus_Support] ifc adt floor conversion

[John Salmen <terrain@xxxxxxx>]

Forgive a beginners question but I have just begun to work with ADT3.3 IFC
exports. Space exports do not seem to carry the floor and ceiling boundaries
with them, despite being enabled. Other than using a mass element is there
any way to define these boundaries.

Many thanks

JOHN SALMEN
TERRAIN E.D.S.
4465 UPHILL RD
DUNCAN BC
CAN V9L 6M7
PH 250-748-7672 FAX 250-748-7612
terrain@xxxxxxx



------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/