[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Energy Plus new user

As a "beginner" I tried to create a new project. But it is 
impossible to run the simulation. Even the geometry can´t displayed 
as DXF. I want simulate 2 Zones. One of this Zones is a 
conservatory. The adjacent rooms (a living room, kitchen and a next 
room, No doors between the rooms therefore I created one zone 
together) is the second zone. The zones are heated with three simple 
exposed radiators. 
Shell I edit a existing IDF example file?
What do I need to integrate a simple radiator heating system? 
After running the simulation I wonna build a Trombe wall (South east 
and South west wall) as third Zone because I want integrate phase 
change materials as thermal storage material due to the less storage 
capacity of the conservatory. Furthermore I want consider the 
thermal behaviour of the conservatory when I change the "view factor 
to ground" in the IDF file. My problem is that I have to finish the 
project in the next 4 weeks. I am desparate and need help!
Thank you very much


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.

 -- please post any files to the appropriate folder in the Files are of the Support Web Site.

Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: