[EnergyPlus_Support] BASEBOARD HEATER: Water:Convective

["markus_gmeinder" <markus_gmeinder@xxxxxx>]

Where can I find a example of all needed input values for a 
BaseboardHeater:Water:Convective system. In the "EnergyPlus Articles 
from the Building Energy Simulation User News, 01/01/2003 through 
12/31/2003" I found the tipp to use the above mentioned system for 
radiator simulation. Do I need for every radiator a BASEBOARDHEATER 
Object? And how can I connect it to the simulation?
Thank you very much
Markus




------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/dkFolB/TM
---------------------------------------------------------------------~->

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
     EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/