Re: [EnergyPlus_Support] Radiator simulation

["Michael J. Witte" <mjwitte@xxxxxxxx>]

A previous reply lists example files to look at.  There is nothing to be gained 
by modeling two radiators in one zone.  You can model them as one larger 
radiator and get the same energy use.

Mike


On 25 Feb 2004, at 16:13, markus_gmeinder wrote:

> Hello,
> I have a 2zone model and a "simple" hot water radiator system. The 
> boiler is placed in Zone 2 as well as 2 radiators. The 3rd radiator 
> is placed in zone 1.
> Is there somebody who has a example-.idf file? (e.g. 
> BASEBOARDHEATER:WATER:CONVECTIVE)
> I think without an example it will be impossible to integrate such a 
> system correct.
> 
> Thank you Markus
> 
> 
> 
> 
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> Attachments are not allowed -- please post any files to the appropriate folder
> in the Files are of the Support Web Site.
> 
> 
> 
> 
>  -- please post any files to the appropriate folder in the Files are of the
>  Support Web Site.
> 
> 
> 
> 
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
     EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/